Pve Nas Disk Standby Hdparm Only Standby Short Time

Pve Nas Disk Standby Hdparm Only Standby Short Time. Server Administration Guide Permanent Standby Servers (System Architectures) So I'd like to set them to standby after some idle time Also, when I use the "disks" gui on Mint (which I believe is a gnome app, though I'm running xfce), there are two separate pages: one for "standby", and one for APM

Also they didn't have any problem before the proxmox reinstall on new hardware. sdb: Device is in IDLE_B mode The drive that I configured manually did spin down - the other did not (there was no disk I/O in this time, in fact the drives were not even mounted).

GitHub lynix/hddspindown.sh Automatic Disk Standby using Kernel diskstats and hdparm

When I try hdparm -C couple of times in a row, I'm getting random-looking results active. I also checked /etc/pve/storage.cfg, but it shows only one path on my ssd inside /var/lib. So I set the standby time manually with: hdparm -S 120 /dev/sda

Linux HDD sleep how to enable and disable with hdparm command tool. - one external USB3 disk (TOSHIBA MQ01ABB200) supporting the "Power Management feature set", mounted on /backup on the pve host - /backup defined in pvesm as backup storage only Since the external disk is only used for a scheduled backup at 3am, I've been trying to put the external disk to standby using - hdparm -S 32 - hdparm -B 32 - hdparm -y This wouldn't be the first time the HDD vendors fudged specs

WebUI shows wrong status of disks Stable Releases Unraid. Adjust HDD standby time with hdparm Check the hdparm examples below to see how you can adjust the standby mode of the HDDs on your system Each has a separate on/off switch, standby has a timeout, APM has a level